- About us  - Vision Mission Value
 - Pneumatic Cylinder  - Pneumatic Valve  - FRL Units  - Accessories
 
 
 
   
  Products
Home - Products - Pneumatic Cylinder      
Home  
Pneumatic Cylinder
Pneumatic Valve
FRL Units
Roto Seal Coupling
Accessories
FMK EXP.
FMK SEC.
DGS EXP.
DGS SEC.
VAC EXP.
VAC SEC.
   
 
      Pneumatic Cylinder : FMK K-05 / K-06
     (Heavy Duty)
     Specification  
“FMK K-05 / K-06” Model (Round Barrel) Double / Single acting Heavy Duty Pneumatic Cylinders with Adjustable Cushioning at Both Ends.
   Technical Data
  Bore 25…  200 mm
  Stroke 25… 1000 mm
(2000 mm available on your request)
  Barrel Aluminum Hard Anodized
  End Cover Aluminum Press. Die Cast
  Seals Polyurethane / Buna – N / Viton
  Temperature 80°/200° C
  Mounting Available on request
   
 
     Pneumatic Cylinder : FMK MK-08
     (Heavy Duty)
     Specification  
“FMK MK-08” Model (Round Barrel) Magnetic Heavy Duty Pneumatic Cylinders with Adjustable Cushioning at Both Ends.
   Technical Data
  Bore 25…  200 mm
  Stroke 25… 1000 mm
(2000 mm available on your request)
  Barrel Aluminum Hard Anodized
  End Cover Aluminum Press. Die Cast
  Seals Polyurethane / Buna – N / Viton
  Temperature 80°/200° C
  Mounting Available on request
   
 
    Pneumatic Cylinder :FMK K-07
    (Heavy Duty)
     Specification  
“FMK MK-08” Model (Round Barrel) Double Ended Double acting Heavy Duty Pneumatic Cylinders with Adjustable Cushioning at Both Ends.
   Technical Data
  Bore 25…  200 mm
  Stroke 25… 1000 mm
(2000 mm available on your request)
  Barrel Aluminum Hard Anodized
  End Cover Aluminum Press. Die Cast
  Seals Polyurethane / Buna – N / Viton
  Temperature 80°/200° C
  Mounting Available on request
   
 
      Pneumatic Cylinder : DGS G-01 / G-02
     Specification  
“DGS  G-01 / G-02” Model double / Single acting pneumatic cylinders
   Technical Data
  Bore 12…  25 mm
  Stroke 25… 800 mm
  Barrel Aluminum Hard Anodized
  End Cover Aluminum Press. Die Cast
  Seals Polyurethane / Buna – N / Viton
  Temperature 80°/200° C
  Mounting Available on request
   
 
      Pneumatic Cylinder : DGS MG-04
     Specification  
“DGS  MG-04” Model Magnetic pneumatic cylinders
   Technical Data
  Bore 12… 25 mm
  Stroke 25… 800 mm
  Barrel Aluminium Hard Anodized
  End Cover Aluminium Hard Anodised
  Seals Polyurethane / Buna – N / Viton
  Temperature 80°/200° C
  Mounting Available on request
   
 
      Pneumatic Cylinder : DGS G-03
     Specification  
“DGS  G-03” Model Double Ended Double acting pneumatic cylinders
   Technical Data
  Bore 12… 25 mm
  Stroke 25… 800 mm
  S/A Cly. Stroke 10 mm… 80 mm
  Barrel Aluminium Hard Anodized
  End Cover Aluminium Hard Anodised
  Seals Polyurethane / Buna – N / Viton
  Temperature 80°/200° C
  Mounting Available on request
   
 
      Pneumatic Cylinder : RMS
    
     Specification  
Regulating Type Pneumatic Power Cylinders with Adjusting Stroke with Adjustable Cushioning at Both Ends.
   Technical Data
  Bore 80…  450 mm
  Stroke 25… 1000 mm
  Barrel Aluminium Hard Anodised / Stainless Steel
  End Cover Aluminum Press. Die Cast / Cast Iron
  Seals Polyurethane / Buna – N / Viton
  Temperature 80°/200° C
  Mounting Available on request
   
 
     Pneumatic Cylinder : VAC
    
     Specification  
“AIRMAX” Make “ VAC” Model  Pneumatic Cylinder For Process Valve Automation Industries (GATE / GLOBE /  KNIFE GATE / PULP Valve etc…)
   Technical Data
  Valve Size 50…  1000 mm
  Bore 63… 600 mm
  Stroke 75… 1000 mm
  Barrel Stainless Steel
  Piston Rod Stainless Steel
  End Cover Cast Iron
  Temperature 80°/200° C
  Seals Polyurethane / Buna – N / Viton
   
 
 
 
    Pneumatic Cylinder Manufacturers, Pneumatic Cylinder, Heavy Duty Pneumatic Cylinders,Pneumatic Valve, Pneumatic Valve Manufacturers, FRL Units, FRL Unit Manufacturers, Accessories
    COPYRIGHT© 2010. All RIGHTS RESERVED. Home | Contact Us | Feedback | Site Map.